These are the stag ferns we saw at the Portland Nursery on Division St. The largest one is probably about 3 1/2 feet tall.
Here are my mounting supplies. I used a wooden board similar to the one I cut in half for my indoor primrose display, a handful of green basket moss, an airy onion bag and of course my fern. I also used a staple gun, garden twine and picture frame mounting kit.
First I decorated my board. I cut off the "feet" that were on the board and then painted the background in brown and orange so that it would match the living room decor. At first I stained it a dark walnut hue and hand painted the Webster's definition of a stag fern on the board but I did not like the way my hand writing looked so I covered it up with craft paint. If you look closely you can still see where my writing was. Then, once the paint dried I put a few coats of polyurethane to seal it from moisture when I water the plant each week. After it dried I mounted my picture frame hook onto the back before attaching the fern.
Then using the staple gun I mounted the bag filled with moss just above center of the wooden board. Since the foliage fell down so low, it looked more balanced to place the bag higher than the center.
Once the bag was in place I took the fern out of its container and placed it on the bag. Then I filled the area around the fern with more green moss to hide the rest of the red bag. To keep the fern and the moss in place I wrapped garden twine around the fern, mound and board to keep everything tight and from falling apart. Eventually the fern will grow a large frond shield that will grab onto the wood and anchor it there by itself.
To water the fern I simply take it off the wall and put it on the ground outside, water it with a watering can and let the wood air dry before hanging it on the wall again.
This was the perfect item to add to my living room collage. I am really close to finishing the whole collage and then I will post photos of how it looks with the stag fern added.